From 683bd9f4992b0e07abbc7760f6e47913ddaa014f Mon Sep 17 00:00:00 2001
From: Ryan Faircloth <rfaircloth@splunk.com>
Date: Fri, 28 Jun 2019 08:35:54 -0400
Subject: [PATCH] Clean build of syslog-docker

---
 .idea/vcs.xml                                 |   3 +
 .idea/workspace.xml                           | 162 +++++++----
 docker-compose.yml                            |  48 +++-
 package/Dockerfile                            |  24 +-
 package/etc/conf.d/b_destinations.conf        | 251 ++++++++++++++++++
 package/etc/conf.d/b_parsers.conf             |  33 +++
 .../etc/conf.d/{blocks => }/b_sources.conf    |   4 +
 package/etc/conf.d/blocks/b_parsers.conf      |  96 -------
 package/etc/conf.d/destinations/d_UF.conf     |  23 --
 package/etc/conf.d/destinations/d_hec.conf    | 185 -------------
 package/etc/conf.d/destinations/d_kafka.conf  |  23 --
 .../etc/conf.d/{filters => }/f_catchall.conf  |  35 +--
 .../etc/conf.d/{filters => }/f_cisco-ios.conf |  37 +--
 .../etc/conf.d/{filters => }/f_palo_alto.conf |  33 +--
 .../etc/conf.d/{filters => }/f_websense.conf  |  29 +-
 package/etc/conf.d/filters/f_cyberark.conf    |  60 -----
 .../etc/conf.d/{sources => }/s_defaults.conf  |   2 +
 package/etc/conf.d/splunk.conf                |  25 +-
 .../conf.d/{templates => }/t_templates.conf   |  24 +-
 package/etc/syslog-ng.conf                    |  86 ++++--
 package/sbin/entrypoint.sh                    |   2 +-
 21 files changed, 612 insertions(+), 573 deletions(-)
 create mode 100755 package/etc/conf.d/b_destinations.conf
 create mode 100755 package/etc/conf.d/b_parsers.conf
 rename package/etc/conf.d/{blocks => }/b_sources.conf (94%)
 mode change 100644 => 100755
 delete mode 100644 package/etc/conf.d/blocks/b_parsers.conf
 delete mode 100644 package/etc/conf.d/destinations/d_UF.conf
 delete mode 100644 package/etc/conf.d/destinations/d_hec.conf
 delete mode 100644 package/etc/conf.d/destinations/d_kafka.conf
 rename package/etc/conf.d/{filters => }/f_catchall.conf (72%)
 mode change 100644 => 100755
 rename package/etc/conf.d/{filters => }/f_cisco-ios.conf (64%)
 mode change 100644 => 100755
 rename package/etc/conf.d/{filters => }/f_palo_alto.conf (69%)
 mode change 100644 => 100755
 rename package/etc/conf.d/{filters => }/f_websense.conf (69%)
 mode change 100644 => 100755
 delete mode 100644 package/etc/conf.d/filters/f_cyberark.conf
 rename package/etc/conf.d/{sources => }/s_defaults.conf (96%)
 mode change 100644 => 100755
 mode change 100644 => 100755 package/etc/conf.d/splunk.conf
 rename package/etc/conf.d/{templates => }/t_templates.conf (57%)
 mode change 100644 => 100755

diff --git a/.idea/vcs.xml b/.idea/vcs.xml
index 94a25f7..53b20c8 100644
--- a/.idea/vcs.xml
+++ b/.idea/vcs.xml
@@ -2,5 +2,8 @@
 <project version="4">
   <component name="VcsDirectoryMappings">
     <mapping directory="$PROJECT_DIR$" vcs="Git" />
+    <mapping directory="$PROJECT_DIR$/package/syslog-ng" vcs="Git" />
+    <mapping directory="$PROJECT_DIR$/package/syslog-ng/lib/ivykis" vcs="Git" />
+    <mapping directory="$PROJECT_DIR$/package/syslog-ng/lib/jsonc" vcs="Git" />
   </component>
 </project>
\ No newline at end of file
diff --git a/.idea/workspace.xml b/.idea/workspace.xml
index 4f55352..1e3cebb 100644
--- a/.idea/workspace.xml
+++ b/.idea/workspace.xml
@@ -1,7 +1,36 @@
 <?xml version="1.0" encoding="UTF-8"?>
 <project version="4">
   <component name="ChangeListManager">
-    <list default="true" id="5d2eb73b-b080-4040-becf-dac45602ac01" name="Default Changelist" comment="" />
+    <list default="true" id="5d2eb73b-b080-4040-becf-dac45602ac01" name="Default Changelist" comment="">
+      <change afterPath="$PROJECT_DIR$/package/etc/conf.d/b_destinations.conf" afterDir="false" />
+      <change afterPath="$PROJECT_DIR$/package/etc/conf.d/b_parsers.conf" afterDir="false" />
+      <change afterPath="$PROJECT_DIR$/package/etc/conf.d/b_sources.conf" afterDir="false" />
+      <change afterPath="$PROJECT_DIR$/package/etc/conf.d/f_catchall.conf" afterDir="false" />
+      <change afterPath="$PROJECT_DIR$/package/etc/conf.d/f_cisco-ios.conf" afterDir="false" />
+      <change afterPath="$PROJECT_DIR$/package/etc/conf.d/f_palo_alto.conf" afterDir="false" />
+      <change afterPath="$PROJECT_DIR$/package/etc/conf.d/f_websense.conf" afterDir="false" />
+      <change afterPath="$PROJECT_DIR$/package/etc/conf.d/s_defaults.conf" afterDir="false" />
+      <change afterPath="$PROJECT_DIR$/package/etc/conf.d/t_templates.conf" afterDir="false" />
+      <change beforePath="$PROJECT_DIR$/.idea/vcs.xml" beforeDir="false" afterPath="$PROJECT_DIR$/.idea/vcs.xml" afterDir="false" />
+      <change beforePath="$PROJECT_DIR$/.idea/workspace.xml" beforeDir="false" afterPath="$PROJECT_DIR$/.idea/workspace.xml" afterDir="false" />
+      <change beforePath="$PROJECT_DIR$/docker-compose.yml" beforeDir="false" afterPath="$PROJECT_DIR$/docker-compose.yml" afterDir="false" />
+      <change beforePath="$PROJECT_DIR$/package/Dockerfile" beforeDir="false" afterPath="$PROJECT_DIR$/package/Dockerfile" afterDir="false" />
+      <change beforePath="$PROJECT_DIR$/package/etc/conf.d/blocks/b_parsers.conf" beforeDir="false" />
+      <change beforePath="$PROJECT_DIR$/package/etc/conf.d/blocks/b_sources.conf" beforeDir="false" />
+      <change beforePath="$PROJECT_DIR$/package/etc/conf.d/destinations/d_UF.conf" beforeDir="false" />
+      <change beforePath="$PROJECT_DIR$/package/etc/conf.d/destinations/d_hec.conf" beforeDir="false" />
+      <change beforePath="$PROJECT_DIR$/package/etc/conf.d/destinations/d_kafka.conf" beforeDir="false" />
+      <change beforePath="$PROJECT_DIR$/package/etc/conf.d/filters/f_catchall.conf" beforeDir="false" />
+      <change beforePath="$PROJECT_DIR$/package/etc/conf.d/filters/f_cisco-ios.conf" beforeDir="false" />
+      <change beforePath="$PROJECT_DIR$/package/etc/conf.d/filters/f_cyberark.conf" beforeDir="false" />
+      <change beforePath="$PROJECT_DIR$/package/etc/conf.d/filters/f_palo_alto.conf" beforeDir="false" />
+      <change beforePath="$PROJECT_DIR$/package/etc/conf.d/filters/f_websense.conf" beforeDir="false" />
+      <change beforePath="$PROJECT_DIR$/package/etc/conf.d/sources/s_defaults.conf" beforeDir="false" />
+      <change beforePath="$PROJECT_DIR$/package/etc/conf.d/splunk.conf" beforeDir="false" afterPath="$PROJECT_DIR$/package/etc/conf.d/splunk.conf" afterDir="false" />
+      <change beforePath="$PROJECT_DIR$/package/etc/conf.d/templates/t_templates.conf" beforeDir="false" />
+      <change beforePath="$PROJECT_DIR$/package/etc/syslog-ng.conf" beforeDir="false" afterPath="$PROJECT_DIR$/package/etc/syslog-ng.conf" afterDir="false" />
+      <change beforePath="$PROJECT_DIR$/package/sbin/entrypoint.sh" beforeDir="false" afterPath="$PROJECT_DIR$/package/sbin/entrypoint.sh" afterDir="false" />
+    </list>
     <option name="EXCLUDED_CONVERTED_TO_IGNORED" value="true" />
     <option name="SHOW_DIALOG" value="false" />
     <option name="HIGHLIGHT_CONFLICTS" value="true" />
@@ -11,46 +40,28 @@
   <component name="FileEditorManager">
     <leaf SIDE_TABS_SIZE_LIMIT_KEY="300">
       <file pinned="false" current-in-tab="false">
-        <entry file="file://$PROJECT_DIR$/tests/test_poc.py">
-          <provider selected="true" editor-type-id="text-editor">
-            <state relative-caret-position="152">
-              <caret line="8" selection-start-line="8" selection-end-line="8" />
-            </state>
-          </provider>
-        </entry>
-      </file>
-      <file pinned="false" current-in-tab="false">
-        <entry file="file://$PROJECT_DIR$/tests/Dockerfile">
-          <provider selected="true" editor-type-id="text-editor">
-            <state relative-caret-position="95">
-              <caret line="5" column="15" selection-start-line="5" selection-start-column="15" selection-end-line="5" selection-end-column="15" />
-            </state>
-          </provider>
-        </entry>
-      </file>
-      <file pinned="false" current-in-tab="false">
-        <entry file="file://$PROJECT_DIR$/docker-compose.yml">
+        <entry file="file://$PROJECT_DIR$/package/Dockerfile">
           <provider selected="true" editor-type-id="text-editor">
-            <state relative-caret-position="171">
-              <caret line="9" column="20" selection-start-line="9" selection-start-column="20" selection-end-line="9" selection-end-column="20" />
+            <state relative-caret-position="245">
+              <caret line="73" column="4" selection-start-line="73" selection-start-column="4" selection-end-line="73" selection-end-column="74" />
             </state>
           </provider>
         </entry>
       </file>
       <file pinned="false" current-in-tab="true">
-        <entry file="file://$PROJECT_DIR$/package/Dockerfile">
+        <entry file="file://$PROJECT_DIR$/package/etc/syslog-ng.conf">
           <provider selected="true" editor-type-id="text-editor">
-            <state relative-caret-position="278">
-              <caret line="50" column="4" selection-start-line="50" selection-start-column="4" selection-end-line="50" selection-end-column="4" />
+            <state>
+              <caret column="13" selection-start-column="13" selection-end-column="13" />
             </state>
           </provider>
         </entry>
       </file>
       <file pinned="false" current-in-tab="false">
-        <entry file="file://$PROJECT_DIR$/tests/requirements.txt">
+        <entry file="file://$PROJECT_DIR$/package/etc/conf.d/splunk.conf">
           <provider selected="true" editor-type-id="text-editor">
-            <state>
-              <caret column="6" selection-start-column="6" selection-end-column="6" />
+            <state relative-caret-position="221">
+              <caret line="64" selection-start-line="64" selection-end-line="64" />
             </state>
           </provider>
         </entry>
@@ -68,8 +79,12 @@
     <findStrings>
       <find>pip</find>
       <find>yum</find>
+      <find>java</find>
     </findStrings>
   </component>
+  <component name="Git.Settings">
+    <option name="RECENT_GIT_ROOT_PATH" value="$PROJECT_DIR$" />
+  </component>
   <component name="IdeDocumentHistory">
     <option name="CHANGED_PATHS">
       <list>
@@ -78,23 +93,27 @@
         <option value="$PROJECT_DIR$/.pytest_cache/Dockerfile" />
         <option value="$PROJECT_DIR$/Dockerfile" />
         <option value="$PROJECT_DIR$/tests/Dockerfile" />
-        <option value="$PROJECT_DIR$/docker-compose.yml" />
         <option value="$PROJECT_DIR$/package/confluent.repo" />
+        <option value="$PROJECT_DIR$/docker-compose.yml" />
+        <option value="$PROJECT_DIR$/package/etc/conf.d/sources/s_defaults.conf" />
+        <option value="$PROJECT_DIR$/package/sbin/entrypoint.sh" />
         <option value="$PROJECT_DIR$/package/Dockerfile" />
+        <option value="$PROJECT_DIR$/package/etc/conf.d/splunk.conf" />
+        <option value="$PROJECT_DIR$/package/etc/syslog-ng.conf" />
       </list>
     </option>
   </component>
-  <component name="ProjectFrameBounds" extendedState="6">
+  <component name="ProjectFrameBounds">
     <option name="y" value="165" />
     <option name="width" value="1760" />
     <option name="height" value="825" />
   </component>
+  <component name="ProjectLevelVcsManager" settingsEditedManually="true" />
   <component name="ProjectView">
     <navigator proportions="" version="1">
       <foldersAlwaysOnTop value="true" />
     </navigator>
     <panes>
-      <pane id="Scope" />
       <pane id="ProjectPane">
         <subPane>
           <expand>
@@ -102,11 +121,6 @@
               <item name="sc4s" type="b2602c69:ProjectViewProjectNode" />
               <item name="sc4s" type="462c0819:PsiDirectoryNode" />
             </path>
-            <path>
-              <item name="sc4s" type="b2602c69:ProjectViewProjectNode" />
-              <item name="sc4s" type="462c0819:PsiDirectoryNode" />
-              <item name="package" type="462c0819:PsiDirectoryNode" />
-            </path>
             <path>
               <item name="sc4s" type="b2602c69:ProjectViewProjectNode" />
               <item name="sc4s" type="462c0819:PsiDirectoryNode" />
@@ -121,9 +135,11 @@
           <select />
         </subPane>
       </pane>
+      <pane id="Scope" />
     </panes>
   </component>
   <component name="PropertiesComponent">
+    <property name="SHARE_PROJECT_CONFIGURATION_FILES" value="true" />
     <property name="WebServerToolWindowFactoryState" value="false" />
     <property name="nodejs_interpreter_path.stuck_in_default_project" value="undefined stuck path" />
     <property name="nodejs_npm_path_reset_for_default_project" value="true" />
@@ -213,7 +229,8 @@
       <updated>1561601135562</updated>
       <workItem from="1561601137668" duration="2116000" />
       <workItem from="1561639548755" duration="1822000" />
-      <workItem from="1561641521581" duration="30780000" />
+      <workItem from="1561641521581" duration="41606000" />
+      <workItem from="1561723177513" duration="1280000" />
     </task>
     <servers />
   </component>
@@ -250,15 +267,15 @@
     </history-entry>
   </component>
   <component name="TimeTrackingManager">
-    <option name="totallyTimeSpent" value="34718000" />
+    <option name="totallyTimeSpent" value="46824000" />
   </component>
   <component name="ToolWindowManager">
-    <frame x="0" y="23" width="1440" height="812" extended-state="6" />
-    <editor active="true" />
+    <frame x="0" y="165" width="1760" height="825" extended-state="0" />
     <layout>
-      <window_info content_ui="combo" id="Project" order="0" visible="true" weight="0.24892704" />
+      <window_info content_ui="combo" id="Project" order="0" visible="true" weight="0.2048894" />
       <window_info id="Structure" order="1" side_tool="true" weight="0.25" />
       <window_info id="Favorites" order="2" side_tool="true" />
+      <window_info anchor="bottom" id="Messages" />
       <window_info anchor="bottom" id="Message" order="0" />
       <window_info anchor="bottom" id="Find" order="1" />
       <window_info anchor="bottom" id="Run" order="2" sideWeight="0.49650756" weight="0.46793997" />
@@ -267,10 +284,10 @@
       <window_info anchor="bottom" id="Inspection" order="5" weight="0.4" />
       <window_info anchor="bottom" id="TODO" order="6" />
       <window_info anchor="bottom" id="Docker" order="7" weight="0.32963988" />
-      <window_info anchor="bottom" id="Version Control" order="8" />
+      <window_info active="true" anchor="bottom" id="Version Control" order="8" visible="true" weight="0.3287858" />
       <window_info anchor="bottom" id="Database Changes" order="9" />
       <window_info anchor="bottom" id="Event Log" order="10" sideWeight="0.5040745" side_tool="true" weight="0.5770805" />
-      <window_info active="true" anchor="bottom" id="Terminal" order="11" sideWeight="0.4959255" visible="true" weight="0.3611111" />
+      <window_info anchor="bottom" id="Terminal" order="11" sideWeight="0.4959255" weight="0.35470667" />
       <window_info anchor="bottom" id="Python Console" order="12" />
       <window_info anchor="right" id="Commander" internal_type="SLIDING" order="0" type="SLIDING" weight="0.4" />
       <window_info anchor="right" id="Ant Build" order="1" weight="0.25" />
@@ -287,45 +304,74 @@
     <SUITE FILE_PATH="coverage/sc4s$pytest_in_tests_docker.coverage" NAME="pytest in tests docker Coverage Results" MODIFIED="1561643507763" SOURCE_PROVIDER="com.intellij.coverage.DefaultCoverageFileProvider" RUNNER="coverage.py" COVERAGE_BY_TEST_ENABLED="true" COVERAGE_TRACING_ENABLED="false" WORKING_DIRECTORY="" />
   </component>
   <component name="editorHistoryManager">
-    <entry file="file://$PROJECT_DIR$/tests/test_poc.py">
+    <entry file="file://$PROJECT_DIR$/package/confluent.repo">
       <provider selected="true" editor-type-id="text-editor">
-        <state relative-caret-position="152">
-          <caret line="8" selection-start-line="8" selection-end-line="8" />
+        <state relative-caret-position="228">
+          <caret line="12" column="9" selection-start-line="12" selection-start-column="9" selection-end-line="12" selection-end-column="9" />
         </state>
       </provider>
     </entry>
-    <entry file="file://$PROJECT_DIR$/tests/requirements.txt">
+    <entry file="file://$PROJECT_DIR$/.gitignore">
       <provider selected="true" editor-type-id="text-editor">
-        <state>
-          <caret column="6" selection-start-column="6" selection-end-column="6" />
+        <state relative-caret-position="133">
+          <caret line="7" column="55" lean-forward="true" selection-start-line="7" selection-start-column="55" selection-end-line="7" selection-end-column="55" />
+        </state>
+      </provider>
+    </entry>
+    <entry file="file://$PROJECT_DIR$/tests/Dockerfile">
+      <provider selected="true" editor-type-id="text-editor">
+        <state relative-caret-position="133">
+          <caret line="7" lean-forward="true" selection-start-line="7" selection-end-line="7" />
+        </state>
+      </provider>
+    </entry>
+    <entry file="file://$PROJECT_DIR$/tests/test_poc.py">
+      <provider selected="true" editor-type-id="text-editor">
+        <state relative-caret-position="152">
+          <caret line="8" selection-start-line="8" selection-end-line="8" />
         </state>
       </provider>
     </entry>
     <entry file="file://$PROJECT_DIR$/docker-compose.yml">
       <provider selected="true" editor-type-id="text-editor">
         <state relative-caret-position="171">
-          <caret line="9" column="20" selection-start-line="9" selection-start-column="20" selection-end-line="9" selection-end-column="20" />
+          <caret line="9" selection-start-line="9" selection-end-line="9" />
         </state>
       </provider>
     </entry>
-    <entry file="file://$PROJECT_DIR$/tests/Dockerfile">
+    <entry file="file://$PROJECT_DIR$/package/etc/conf.d/sources/s_defaults.conf" />
+    <entry file="file://$PROJECT_DIR$/package/sbin/entrypoint.sh">
       <provider selected="true" editor-type-id="text-editor">
-        <state relative-caret-position="95">
-          <caret line="5" column="15" selection-start-line="5" selection-start-column="15" selection-end-line="5" selection-end-column="15" />
+        <state relative-caret-position="152">
+          <caret line="8" lean-forward="true" selection-start-line="8" selection-end-line="8" />
         </state>
       </provider>
     </entry>
-    <entry file="file://$PROJECT_DIR$/package/confluent.repo">
+    <entry file="file://$PROJECT_DIR$/tests/requirements.txt">
       <provider selected="true" editor-type-id="text-editor">
-        <state relative-caret-position="228">
-          <caret line="12" column="9" selection-start-line="12" selection-start-column="9" selection-end-line="12" selection-end-column="9" />
+        <state>
+          <caret column="6" selection-start-column="6" selection-end-column="6" />
         </state>
       </provider>
     </entry>
     <entry file="file://$PROJECT_DIR$/package/Dockerfile">
       <provider selected="true" editor-type-id="text-editor">
-        <state relative-caret-position="278">
-          <caret line="50" column="4" selection-start-line="50" selection-start-column="4" selection-end-line="50" selection-end-column="4" />
+        <state relative-caret-position="245">
+          <caret line="73" column="4" selection-start-line="73" selection-start-column="4" selection-end-line="73" selection-end-column="74" />
+        </state>
+      </provider>
+    </entry>
+    <entry file="file://$PROJECT_DIR$/package/etc/conf.d/splunk.conf">
+      <provider selected="true" editor-type-id="text-editor">
+        <state relative-caret-position="221">
+          <caret line="64" selection-start-line="64" selection-end-line="64" />
+        </state>
+      </provider>
+    </entry>
+    <entry file="file://$PROJECT_DIR$/package/etc/syslog-ng.conf">
+      <provider selected="true" editor-type-id="text-editor">
+        <state>
+          <caret column="13" selection-start-column="13" selection-end-column="13" />
         </state>
       </provider>
     </entry>
diff --git a/docker-compose.yml b/docker-compose.yml
index 6332ab6..3e865c9 100644
--- a/docker-compose.yml
+++ b/docker-compose.yml
@@ -4,7 +4,51 @@ services:
     build: ./tests
     links:
       - splunk
+  syslog-ng:
+    image: rfaircloth/scs:develop
+    build: ./package
+    hostname: syslog-ng
+    ports:
+      - "514"
+      - "601"
+      - "514/udp"
+      - "5514"
+      - "5514/udp"
+    stdin_open: true
+    tty: true
+    links:
+      - splunk
+    environment:
+      - SPLUNK_HEC_URL=https://splunk:8088/services/collector/event","https://splunk:8088/services/collector/event
+      - SPLUNK_HEC_STATSURL=https://splunk:8088/services/collector/event
+      - SPLUNK_HEC_TOKEN=a778f63a-5dff-4e3c-a72c-a03183659e94
+      - SPLUNK_CONNECT_METHOD=hec
+      - SPLUNK_DEFAULT_INDEX=main
+      - SPLUNK_METRICS_INDEX=metrics
+#    logging:
+#      driver: splunk
+#      options:
+#        splunk-token: a778f63a-5dff-4e3c-a72c-a03183659e94
+#        splunk-url: https://splunk:8088/services/collector/event
+#        splunk-index: main
+#        splunk-insecureskipverify: true
+#        splunk-verify-connection: false
   splunk:
     image: splunk/splunk:latest
-  syslog:
-    build: ./package
\ No newline at end of file
+    hostname: splunk
+    ports:
+      - "8000:8000"
+      - "8088:8088"
+      - "8089:8089"
+    environment:
+      - SPLUNK_HEC_TOKEN=a778f63a-5dff-4e3c-a72c-a03183659e94
+      - SPLUNK_PASSWORD=Changed@11
+      - SPLUNK_START_ARGS=--accept-license
+#    logging:
+#      driver: splunk
+#      options:
+#        splunk-token: a778f63a-5dff-4e3c-a72c-a03183659e94
+#        splunk-url: https://splunk:8088/services/collector/event
+#        splunk-index: main
+#        splunk-insecureskipverify: true
+#        splunk-verify-connection: false
diff --git a/package/Dockerfile b/package/Dockerfile
index 18d17ea..3ef976b 100644
--- a/package/Dockerfile
+++ b/package/Dockerfile
@@ -56,22 +56,28 @@ RUN cd /tmp ;\
     yum install epel-release-latest-7.noarch.rpm -y ;\
     rm epel-release-latest-7.noarch.rpm ;\
     rpm --import https://packages.confluent.io/rpm/5.2/archive.key ;\
-    yum install tzdata libdbi libsecret libxml2 sqlite tcp_wrappers librdkafka \
-    rh-python36 rh-python36-python-tools libcurl ivykis -y;\
-    echo source scl_source enable rh-python36 >>/etc/profile.d/enablepython36.sh
+    yum install gcc tzdata libdbi libsecret libxml2 sqlite tcp_wrappers librdkafka \
+    rh-python36 rh-python36-python-tools libcurl ivykis scl-utils tcp_wrappers-libs -y;\
+    echo source scl_source enable rh-python36 >>/etc/profile.d/enablepython36.sh ;\
+    source scl_source enable rh-python36 ;\
+    pip install dumb-init
+
 
 COPY --from=0 /opt/syslog-ng /opt/syslog-ng
-COPY scripts/* /opt/syslog-ng/sbin/
-COPY etc/* /opt/syslog-ng/etc
-COPY sbin/* /sbin/
+COPY scripts/splunkmetrics.sh /opt/syslog-ng/sbin/splunkmetrics.sh
+COPY scripts/switch_transport.sh /opt/syslog-ng/sbin/switch_transport.sh
+COPY etc/syslog-ng.conf /opt/syslog-ng/etc/syslog-ng.conf
+COPY etc/conf.d /opt/syslog-ng/etc/conf.d
+COPY sbin/entrypoint.sh /sbin/entrypoint.sh
 
-RUN /opt/syslog-ng/sbin/syslog-ng -t
+RUN source scl_source enable rh-python36 ;/opt/syslog-ng/sbin/syslog-ng  -V
+RUN source scl_source enable rh-python36 ;/opt/syslog-ng/sbin/syslog-ng -t
 
 ENV DEBCONF_NONINTERACTIVE_SEEN=true
-ENV SPLUNK_CONNECT_METHOD=uf
+ENV SPLUNK_CONNECT_METHOD=hec
 
 EXPOSE 514
 EXPOSE 601/tcp
 EXPOSE 6514/tcp
 
-ENTRYPOINT ["/sbin/entrypoint.sh", "--"]
+#ENTRYPOINT ["/sbin/entrypoint.sh", "--"]
diff --git a/package/etc/conf.d/b_destinations.conf b/package/etc/conf.d/b_destinations.conf
new file mode 100755
index 0000000..3e65461
--- /dev/null
+++ b/package/etc/conf.d/b_destinations.conf
@@ -0,0 +1,251 @@
+# ===============================================================================================
+# Destination Blocks (functions) for Splunk destinations
+# Block argument defaults are defined in main syslog-ng.conf file
+# Additional indexed fields (based on syslog-ng macros) can be added to the "with_metadata" blocks
+# for both HEC and Kafka.
+# Format is "fields.<splunk_indexed_field>=<syslog-ng macro>"
+# ===============================================================================================
+
+# ===============================================================================================
+# blocks for file destination (for use with the Splunk Universal Forwarder)
+# ===============================================================================================
+
+# ===============================================================================================
+# Logfile Local Defaults:
+# vendor: unassigned
+# message: suffix for log file names; "messages"
+# ===============================================================================================
+
+block destination d_splunk_logfile(category("") 
+                                   vendor("unassigned") 
+                                   filename("messages") 
+                                   use_template(`splunk-default-template`)
+                                   ) {
+    file("`splunk-log-root`/`category`/$(lowercase \"${LOGHOST}\")/`vendor`/$(lowercase \"${HOST}\")/${YEAR}.${MONTH}.${DAY}.${HOUR}-`filename`"
+         template(`use_template`)
+         flush-lines(0)
+         create-dirs(yes)
+         dir_owner(`splunk-user`)
+         dir_group(`splunk-group`)
+         dir_perm(0700)
+         owner(`splunk-user`)
+         group(`splunk-group`)
+         perm(0600)
+         );
+    };
+
+# ===============================================================================================
+# blocks for direct connection to Splunk via Kafka and HEC
+# ===============================================================================================
+# ===============================================================================================
+# Kafka with Metadata (Facility and Priority):
+# ===============================================================================================
+
+block destination d_kafka_with_metadata (kafka-libs(`kafka-lib-dir`) 
+                                         kafka-brokers(`splunk-kafka-brokers`) 
+                                         sourcetype(`splunk-sourcetype`) 
+                                         topic(`splunk-topic`) 
+                                         index(`splunk-index`) 
+                                         use_template(`splunk-default-template`)
+                                        ) {
+    kafka(client-lib-dir("`kafka-libs`")
+          kafka-bootstrap-servers("`kafka-brokers`")
+          persist-name("`kafka_brokers`_`topic`_`sourcetype`_`index`")
+          template('$(format-json
+                      time=$S_UNIXTIME.$S_MSEC
+                      host=$HOST
+                      source=${HOST_FROM}
+                      sourcetype=`sourcetype`
+                      index=`index`
+                      event=$(template `use_template`)
+                      fields.facility=$FACILITY
+                      fields.severity=$LEVEL)')
+          topic("`topic`")
+          );
+    };
+
+# ===============================================================================================
+# Kafka with Full Metadata; additional fields can be added
+# ===============================================================================================
+
+block destination d_kafka_with_full_metadata (kafka-libs(`kafka-lib-dir`)
+                                              kafka-brokers(`splunk-kafka-brokers`)
+                                              sourcetype(`splunk-sourcetype`)
+                                              topic(`splunk-topic`)
+                                              index(`splunk-index`)
+                                              use_template(`splunk-default-template`)
+                                             ) {
+     kafka(client-lib-dir("`kafka-libs`")
+           kafka-bootstrap-servers("`kafka-brokers`")
+           persist-name("`kafka_brokers`_`topic`_`sourcetype`_`index`")
+           template('$(format-json
+                       time=$S_UNIXTIME.$S_MSEC
+                       host=$HOST
+                       source=${HOST_FROM}
+                       sourcetype=`sourcetype`
+                       index=`index`
+                       event=$(template `use_template`)
+                       fields.facility=$FACILITY
+                       fields.severity=$LEVEL
+                       fields.message_header=$MSGHDR
+                       fields.program_name=$PROGRAM
+                       fields.pid=$PID
+                       fields.full_message=$(template t_everything)
+                      )')
+          topic("`topic`")
+          );
+    };
+
+# ===============================================================================================
+# Basic Kafka (no indexed fields)
+# ===============================================================================================
+
+block destination d_kafka_basic (kafka-libs(`kafka-lib-dir`)
+                                 kafka-brokers(`splunk-kafka-brokers`)
+                                 sourcetype(`splunk-sourcetype`)
+                                 topic(`splunk-topic`)
+                                 index(`splunk-index`)
+                                 use_template(`splunk-default-template`)
+                                 ) {
+    kafka(client-lib-dir("`kafka-libs`")
+          kafka-bootstrap-servers("`kafka-brokers`")
+          persist-name("`kafka_brokers`_`topic`_`sourcetype`_`index`")
+          template('$(format-json time=$S_UNIXTIME
+                      host=$HOST
+                      source=$HOST_FROM
+                      sourcetype=`sourcetype`
+                      index=`index`
+                      event=$(template `use_template`))') 
+          topic("`topic`")
+          );
+    };
+
+# ===============================================================================================
+# HEC with Metadata (Facility and Priority):
+# Be sure to adjust batch paramaters below to suit scale/environment
+# If validated certs are used, uncomment relevant lines in the tls() block below
+# and change peer-verify() to "yes"
+# ===============================================================================================
+
+block destination d_hec_with_metadata (hec-url(`splunk-hec-url`) 
+                                       hec-token(`splunk-hec-token`) 
+                                       sourcetype(`splunk-sourcetype`) 
+                                       index(`splunk-index`) 
+                                       use_template(`splunk-default-template`)
+                                      ) {
+    http(url("`hec-url`")
+         method("POST")
+         batch-lines(10)
+         batch-bytes(512Kb)
+         batch-timeout(5000)
+         user_agent("syslog-ng User Agent")
+         user("syslog-ng")
+         password("`hec-token`")
+         persist-name("`hec-url`_`sourcetype`_`hec-token`_`index`")
+         tls(peer-verify(no)
+#            ca-dir("dir")
+#            ca-file("ca")
+#            cert-file("cert")
+#            cipher-suite("cipher") 
+#            key-file("key")
+#            peer-verify(yes|no)
+#            ssl-version(<the permitted SSL/TLS version>)
+            )
+         body('$(format-json
+                 time=$S_UNIXTIME.$S_MSEC
+                 host=$HOST
+                 source=${HOST_FROM}
+                 sourcetype=`sourcetype`
+                 index=`index`
+                 event=$(template `use_template`)
+                 fields.facility=$FACILITY
+                 fields.severity=$LEVEL)')
+        );
+    };
+
+# ===============================================================================================
+# HEC with Full Metadata; additional fields can be added
+# Be sure to adjust batch paramaters below to suit scale/environment
+# If validated certs are used, uncomment relevant lines in the tls() block below
+# and change peer-verify() to "yes"
+# ===============================================================================================
+
+block destination d_hec_with_full_metadata(hec-url(`splunk-hec-url`)
+                                           hec-token(`splunk-hec-token`)
+                                           sourcetype(`splunk-sourcetype`)
+                                           index(`splunk-index`)
+                                           use_template(`splunk-default-template`)
+                                          ) {
+    http(url("`hec-url`")
+         method("POST")
+         batch-lines(10)
+         batch-bytes(512Kb)
+         batch-timeout(5000)
+         user_agent("syslog-ng User Agent")
+         user("syslog-ng")
+         password("`hec-token`")
+         persist-name("`hec-url`_`sourcetype`_`hec-token`_`index`")
+         tls(peer-verify(no)
+#            ca-dir("dir")
+#            ca-file("ca")
+#            cert-file("cert")
+#            cipher-suite("cipher")
+#            key-file("key")
+#            peer-verify(yes|no)
+#            ssl-version(<the permitted SSL/TLS version>)
+             )
+         body('$(format-json
+                 time=$S_UNIXTIME.$S_MSEC
+                 host=$HOST
+                 source=${HOST_FROM}
+                 sourcetype=`sourcetype`
+                 index=`index`
+                 event=$(template `use_template`)
+		 fields.fullhost_from=${FULLHOST_FROM}
+                 fields.facility=$FACILITY
+                 fields.severity=$LEVEL
+                 fields.message_header=$MSGHDR
+                 fields.program_name=$PROGRAM
+                 fields.pid=$PID
+                 fields.full_message=$(template t_everything)
+                )')
+        );
+    };
+
+# ===============================================================================================
+# Basic HEC (no indexed fields)
+# ===============================================================================================
+
+block destination d_hec_basic (hec-url(`splunk-hec-url`)
+                               hec-token(`splunk-hec-token`)
+                               sourcetype(`splunk-sourcetype`)
+                               index(`splunk-index`)
+                               use_template(`splunk-default-template`)
+                              ) {
+    http(url("`hec-url`")
+         method("POST")
+         batch-lines(10)
+         batch-bytes(512Kb)
+         batch-timeout(5000)
+         user_agent("syslog-ng User Agent")
+         user("syslog-ng")
+         password("`hec-token`")
+         persist-name("`hec-url`_`sourcetype`_`hec-token`_`index`")
+         tls(peer-verify(no)
+#            ca-dir("dir")
+#            ca-file("ca")
+#            cert-file("cert")
+#            cipher-suite("cipher")
+#            key-file("key")
+#            peer-verify(yes|no)
+#            ssl-version(<the permitted SSL/TLS version>)
+             )
+         body('$(format-json
+                 time=$S_UNIXTIME.$S_MSEC
+                 host=$HOST
+                 source=${HOST_FROM}
+                 sourcetype=`sourcetype`
+                 index=`index`
+                 event=$(template `use_template`))')
+        );
+    };
diff --git a/package/etc/conf.d/b_parsers.conf b/package/etc/conf.d/b_parsers.conf
new file mode 100755
index 0000000..b68a4e4
--- /dev/null
+++ b/package/etc/conf.d/b_parsers.conf
@@ -0,0 +1,33 @@
+# ===============================================================================================
+# ForcePoint (Websense)
+# ===============================================================================================
+
+# ===============================================================================================
+# Log Format:
+# <159>Dec 19 10:48:57 EST 10.203.28.21 vendor=Websense product=Security product_version=7.7.0 action=permitted severity=1 category=153 user=- src_host=10.64.134.74 src_port=62189 dst_host=mail.google.com dst_ip=74.125.224.53 dst_port=443 bytes_out=197 bytes_in=76 http_response=200 http_method=CONNECT http_content_type=- http_user_agent=Mozilla/5.0_(Windows;_U;_Windows_NT_6.1;_enUS;_rv:1.9.2.23)_Gecko/20110920_Firefox/3.6.23 http_proxy_status_code=200 reason=- disposition=1034 policy=- role=8 duration=0 url=https://mail.google.com
+#
+# Primary reason for non-compliance:  %Z (timesone mnemonic) appended after date/time
+# ===============================================================================================
+
+block parser p_websense-parser(prefix(".websense.")) {
+    channel {
+        rewrite {
+            # normal BSD timestamp, plus a timezone code. Remove the
+            # timezone information for now.
+            subst('([A-Za-z]{3} [0-9 ]\d \d{2}:\d{2}:\d{2}) [A-Z]{3,4}' "$1 " flags(global) value("MSG"));
+
+            # add a $PROGRAM field, so that syslog-parser() would extract
+            # that properly
+        subst('(vendor=Websense)' "Websense: $1" flags(global) value("MSG"));
+        };
+    parser {
+            # by this time this message is a properly formatted syslog
+            # message
+            syslog-parser(time-zone(`default-timezone`));
+            # syslog-parser();
+
+        # extract name-value pairs.
+        # kv-parser(prefix("`prefix`"));
+    };
+    };
+};
diff --git a/package/etc/conf.d/blocks/b_sources.conf b/package/etc/conf.d/b_sources.conf
old mode 100644
new mode 100755
similarity index 94%
rename from package/etc/conf.d/blocks/b_sources.conf
rename to package/etc/conf.d/b_sources.conf
index 90a5e2d..5e53849
--- a/package/etc/conf.d/blocks/b_sources.conf
+++ b/package/etc/conf.d/b_sources.conf
@@ -17,6 +17,7 @@ block source s_unique-ports(udp_port() tcp_port() flags("no-parse")) {
            use-dns(no)
            use-fqdn(no)
            chain-hostnames(off)
+           time-zone(`default-timezone`)
            flags(`flags`)
            );
 
@@ -36,6 +37,7 @@ block source s_unique-ports(udp_port() tcp_port() flags("no-parse")) {
            use-dns(no)
            use-fqdn(no)
            chain-hostnames(off)
+           time-zone(`default-timezone`)
            flags(`flags`)
            );
 };
@@ -55,6 +57,7 @@ block source s_unique-udp-port(udp_port() flags("no-parse")) {
            use-dns(no)
            use-fqdn(no)
            chain-hostnames(off)
+           time-zone(`default-timezone`)
            flags(`flags`)
            );
 };
@@ -76,6 +79,7 @@ block source s_unique-tcp-port(tcp_port() flags("no-parse")) {
            use-dns(no)
            use-fqdn(no)
            chain-hostnames(off)
+           time-zone(`default-timezone`)
            flags(`flags`)
            );
 };
diff --git a/package/etc/conf.d/blocks/b_parsers.conf b/package/etc/conf.d/blocks/b_parsers.conf
deleted file mode 100644
index c5d9063..0000000
--- a/package/etc/conf.d/blocks/b_parsers.conf
+++ /dev/null
@@ -1,96 +0,0 @@
-# ===============================================================================================
-# ForcePoint (Websense)
-# ===============================================================================================
-
-# ===============================================================================================
-# Log Format:
-# <159>Dec 19 10:48:57 EST 10.203.28.21 vendor=Websense product=Security product_version=7.7.0 action=permitted severity=1 category=153 user=- src_host=10.64.134.74 src_port=62189 dst_host=mail.google.com dst_ip=74.125.224.53 dst_port=443 bytes_out=197 bytes_in=76 http_response=200 http_method=CONNECT http_content_type=- http_user_agent=Mozilla/5.0_(Windows;_U;_Windows_NT_6.1;_enUS;_rv:1.9.2.23)_Gecko/20110920_Firefox/3.6.23 http_proxy_status_code=200 reason=- disposition=1034 policy=- role=8 duration=0 url=https://mail.google.com
-#
-# Primary reason for non-compliance:  %Z (timesone mnemonic) appended after date/time
-# ===============================================================================================
-
-block parser p_websense-parser(prefix(".websense.")) {
-    channel {
-        rewrite {
-            # normal BSD timestamp, plus a timezone code. Remove the
-            # timezone information for now.
-            subst('([A-Za-z]{3} [0-9 ]\d \d{2}:\d{2}:\d{2}) [A-Z]{3,4}' "$1 " flags(global) value("MSG"));
-
-            # add a $PROGRAM field, so that syslog-parser() would extract
-            # that properly
-            subst('(vendor=Websense)' "Websense: $1" flags(global) value("MSG"));
-        };
-        parser {
-            # by this time this message is a properly formatted syslog message
-            syslog-parser(time-zone(`default-timezone`));
-            # syslog-parser();
-
-        # extract name-value pairs.
-        # kv-parser(prefix("`prefix`"));
-        };
-    };
-};
-
-block parser p_RFC5424-lite(prefix(".rfc5424-lite.")) {
-    channel {
-        rewrite {
-            # Remove Version Identifier
-              subst('(<\d+>)\d+' "$1" value("MSG"));
-
-        };
-        parser {
-            # by this time this message will parse with the BSD 3164 parser
-            syslog-parser(time-zone(`default-timezone`));
-            # syslog-parser();
-
-        # extract name-value pairs.
-        # kv-parser(prefix("`prefix`"));
-        };
-    };
-};
-
-block parser p_test-parser(prefix(".testparse.")) {
-    channel {
-        rewrite {
-            # Put your rewrite rule here;use "MSG" as no-parse() puts entire payload there
-            # subst('(>.{12})\s' "${1}T" value("MSG"));
-        };
-        parser {
-            # Don't initially parse so full output can be seen
-            # syslog-parser(time-zone(`default-timezone`) flags(syslog-protocol));
-            # syslog-parser();
-            # syslog-parser(time-zone(`default-timezone`));
-            # date-parser(format("%Y-%m-%d %H:%M:%S") template("$(substr ${MESSAGE} 0 19)") time-zone(`default-timezone`));
-        };
-    };
-};
-
-block parser p_add_context_data(data-source("unassigned")) {
-      add-contextual-data(selector(`data-source`), database("sourcetype-db.csv"), default-selector("unknown"));
-};
-
-block rewrite r_set_splunk(sourcetype(`splunk-sourcetype`)
-                           index(`splunk-index`)
-                           template(`splunk-default-template`)
-                           token(`splunk-hec-token`)
-                           url(`splunk-hec-url`)
-                           brokers(`splunk-kafka-brokers`)
-                           topic(`splunk-kafka-topic`)
-                           vendor("unassigned")
-                           category("")
-                           filename("messages")
-                          ) {
-      set("`index`", value(".splunk.index"));
-      set("`sourcetype`", value(".splunk.sourcetype"));
-      set("`template`", value(".splunk.template"));
-      set('`url`', value(".splunk.url"));
-      set("`token`", value(".splunk.token"));
-      set("`brokers`", value(".splunk.brokers"));
-      set("`topic`", value(".splunk.topic"));
-      set("`vendor`", value(".splunk.vendor"));
-      set("`category`", value(".splunk.category"));
-      set("`filename`", value(".splunk.filename"));
-      set($FACILITY, value("fields.facility"));
-      set($LEVEL, value("fields.severity"));
-      set($LOGHOST, value("fields.syslog-server"));
-  };
diff --git a/package/etc/conf.d/destinations/d_UF.conf b/package/etc/conf.d/destinations/d_UF.conf
deleted file mode 100644
index 9c9281a..0000000
--- a/package/etc/conf.d/destinations/d_UF.conf
+++ /dev/null
@@ -1,23 +0,0 @@
-# ===============================================================================================
-# File destination (for use with the Splunk Universal Forwarder)
-# ===============================================================================================
-
-# ===============================================================================================
-# Logfile Local Defaults:
-# vendor: unassigned
-# message: suffix for log file names: "messages"
-# ===============================================================================================
-
-destination d_splunk_logfile {
-    file("`splunk-log-root`/${.splunk.category}/$(lowercase \"${LOGHOST}\")/${.splunk.vendor}/$(lowercase \"${HOST}\")/${YEAR}.${MONTH}.${DAY}.${HOUR}-${.splunk.filename}"
-         template(`splunk-default-template`)
-         flush-lines(0)
-         create-dirs(yes)
-         dir_owner(`splunk-user`)
-         dir_group(`splunk-group`)
-         dir_perm(0700)
-         owner(`splunk-user`)
-         group(`splunk-group`)
-         perm(0600)
-         );
-    };
diff --git a/package/etc/conf.d/destinations/d_hec.conf b/package/etc/conf.d/destinations/d_hec.conf
deleted file mode 100644
index 0b808d1..0000000
--- a/package/etc/conf.d/destinations/d_hec.conf
+++ /dev/null
@@ -1,185 +0,0 @@
-# ===============================================================================================
-# Direct connection to Splunk via HEC
-# ===============================================================================================
-
-# ===============================================================================================
-# HEC with standard template
-# Be sure to adjust batch paramaters below to suit scale/environment
-# Set workers to the number of indexers or HWF HEC endpoints
-# If validated certs are used, uncomment relevant lines in the tls() block below
-# and change peer-verify() to "yes"
-# ===============================================================================================
-
-destination d_hec_standard {
-    http(url(`splunk-hec-url`)
-         method("POST")
-         log-fifo-size(`splunk-log-fifo-size`)
-         workers(`worker-threads`)
-         batch-lines(1000)
-         batch-bytes(20Mb)
-         batch-timeout(1)
-         timeout(5)
-         user_agent("syslog-ng User Agent")
-         user("syslog-ng")
-         password(`splunk-hec-token`)
-         persist-name("t_standard")
-#        disk-buffer(mem-buf-length(200000)
-#                    disk-buf-size(107374182400)
-#                    reliable(no)
-#                    dir("/usr/local/etc//disk-buffer"))
-         tls(peer-verify(no)
-#            ca-dir("dir")
-#            ca-file("ca")
-#            cert-file("cert")
-#            cipher-suite("cipher")
-#            key-file("key")
-#            peer-verify(yes|no)
-#            ssl-version(<the permitted SSL/TLS version>)
-            )
-         body('$(format-json
-                 time=$S_UNIXTIME.$S_MSEC
-                 host=$HOST
-                 source=${HOST_FROM}
-                 sourcetype=${.splunk.sourcetype}
-                 index=${.splunk.index}
-                 event=$(template t_standard)
-                 fields.*)')
-        );
-    };
-
-
-# ===============================================================================================
-# HEC with t_hdr_msg template (for Palo Alto)
-# Be sure to adjust batch paramaters below to suit scale/environment
-# Set workers to the number of indexers or HWF HEC endpoints
-# If validated certs are used, uncomment relevant lines in the tls() block below
-# and change peer-verify() to "yes"
-# ===============================================================================================
-
-destination d_hec_hdr_msg {
-    http(url(`splunk-hec-url`)
-         method("POST")
-         log-fifo-size(`splunk-log-fifo-size`)
-         workers(`worker-threads`)
-         batch-lines(1000)
-         batch-bytes(20Mb)
-         batch-timeout(1)
-         timeout(5)
-         user_agent("syslog-ng User Agent")
-         user("syslog-ng")
-         password(`splunk-hec-token`)
-         persist-name("t_hdr_msg")
-#        disk-buffer(mem-buf-length(200000)
-#                    disk-buf-size(107374182400)
-#                    reliable(no)
-#                    dir("/usr/local/etc//disk-buffer"))
-         tls(peer-verify(no)
-#            ca-dir("dir")
-#            ca-file("ca")
-#            cert-file("cert")
-#            cipher-suite("cipher")
-#            key-file("key")
-#            peer-verify(yes|no)
-#            ssl-version(<the permitted SSL/TLS version>)
-            )
-         body('$(format-json
-                 time=$S_UNIXTIME.$S_MSEC
-                 host=$HOST
-                 source=${HOST_FROM}
-                 sourcetype=${.splunk.sourcetype}
-                 index=${.splunk.index}
-                 event=$(template t_hdr_msg)
-                 fields.*)')
-        );
-    };
-
-
-# ===============================================================================================
-# HEC with the "everything" template
-# Be sure to adjust batch paramaters below to suit scale/environment
-# Set workers to the number of indexers or HWF HEC endpoints
-# If validated certs are used, uncomment relevant lines in the tls() block below
-# and change peer-verify() to "yes"
-# ===============================================================================================
-
-destination d_hec_everything {
-    http(url(`splunk-hec-url`)
-         method("POST")
-         log-fifo-size(`splunk-log-fifo-size`)
-         workers(`worker-threads`)
-         batch-lines(1000)
-         batch-bytes(20Mb)
-         batch-timeout(1)
-         timeout(5)
-         user_agent("syslog-ng User Agent")
-         user("syslog-ng")
-         password(`splunk-hec-token`)
-         persist-name("t_everything")
-#        disk-buffer(mem-buf-length(200000)
-#                    disk-buf-size(107374182400)
-#                    reliable(no)
-#                    dir("/usr/local/etc//disk-buffer"))
-         tls(peer-verify(no)
-#            ca-dir("dir")
-#            ca-file("ca")
-#            cert-file("cert")
-#            cipher-suite("cipher")
-#            key-file("key")
-#            peer-verify(yes|no)
-#            ssl-version(<the permitted SSL/TLS version>)
-            )
-         body('$(format-json
-                 time=$S_UNIXTIME.$S_MSEC
-                 host=$HOST
-                 source=${HOST_FROM}
-                 sourcetype=${.splunk.sourcetype}
-                 index=${.splunk.index}
-                 event=$(template t_everything)
-                 fields.*)')
-        );
-    };
-
-# ===============================================================================================
-# HEC with the "JSON" template
-# Be sure to adjust batch paramaters below to suit scale/environment
-# Set workers to the number of indexers or HWF HEC endpoints
-# If validated certs are used, uncomment relevant lines in the tls() block below
-# and change peer-verify() to "yes"
-# ===============================================================================================
-
-destination d_hec_json {
-    http(url(`splunk-hec-url`)
-         method("POST")
-         log-fifo-size(`splunk-log-fifo-size`)
-         workers(`worker-threads`)
-         batch-lines(1000)
-         batch-bytes(20Mb)
-         batch-timeout(1)
-         timeout(5)
-         user_agent("syslog-ng User Agent")
-         user("syslog-ng")
-         password(`splunk-hec-token`)
-         persist-name("t_json")
-#        disk-buffer(mem-buf-length(200000)
-#                    disk-buf-size(107374182400)
-#                    reliable(no)
-#                    dir("/usr/local/etc//disk-buffer"))
-         tls(peer-verify(no)
-#            ca-dir("dir")
-#            ca-file("ca")
-#            cert-file("cert")
-#            cipher-suite("cipher")
-#            key-file("key")
-#            peer-verify(yes|no)
-#            ssl-version(<the permitted SSL/TLS version>)
-            )
-         body('$(format-json
-                 time=$S_UNIXTIME.$S_MSEC
-                 host=$HOST
-                 source=${HOST_FROM}
-                 sourcetype=${.splunk.sourcetype}
-                 index=${.splunk.index}
-                 event=$(template t_JSON)
-                 fields.*)')
-        );
-    };
diff --git a/package/etc/conf.d/destinations/d_kafka.conf b/package/etc/conf.d/destinations/d_kafka.conf
deleted file mode 100644
index 1776f0e..0000000
--- a/package/etc/conf.d/destinations/d_kafka.conf
+++ /dev/null
@@ -1,23 +0,0 @@
-# ===============================================================================================
-# Direct connection to Splunk via Kafka
-# ===============================================================================================
-
-# ===============================================================================================
-# Kafka with default template
-# ===============================================================================================
-
-destination d_kafka_default  {
-    kafka-c(
-          bootstrap-servers("`splunk-kafka-brokers`")
-          log-fifo-size(`splunk-log-fifo-size`)
-          message('$(format-json
-                      time=$S_UNIXTIME.$S_MSEC
-                      host=$HOST
-                      source=${HOST_FROM}
-                      sourcetype=${.splunk.sourcetype}
-                      index=${.splunk.index}
-                      event=$(template `splunk-default-template`)
-                      fields.*)')
-          topic("`splunk-kafka-topic`")
-          );
-    };
diff --git a/package/etc/conf.d/filters/f_catchall.conf b/package/etc/conf.d/f_catchall.conf
old mode 100644
new mode 100755
similarity index 72%
rename from package/etc/conf.d/filters/f_catchall.conf
rename to package/etc/conf.d/f_catchall.conf
index e46de3c..aa9abbf
--- a/package/etc/conf.d/filters/f_catchall.conf
+++ b/package/etc/conf.d/f_catchall.conf
@@ -30,9 +30,7 @@ source(s_default-ports);
 # ===============================================================================================
 
 # This is "normal" RFC3164-formatted (BSD-syslog) messages. Always try this one first if unsure.
-# parser { syslog-parser(time-zone(`default-timezone`)); };
-# parser { date-parser(format("%Y-%m-%d %H:%M:%S") template("$(substr ${MESSAGE} 8 26)")); };
-# parser { p_test-parser(); };
+parser { syslog-parser(time-zone(`default-timezone`)); };
 
 # For RFC5424-formatted messages, use this instead
 # parser { syslog-parser(time-zone(`default-timezone`) flags(syslog-protocol)); };
@@ -48,25 +46,32 @@ source(s_default-ports);
 # ===============================================================================================
 # Section 4:  destination configuration
 # Select the desired destination to use in the log path from the three choices below,
-# based on the transfer method (UF/HEC/Kafka) desired. Then, using the rewrite rule below,
-# provide the sourcetype and optional index (if different from the default) for thie data
-# source. Then, uncomment the second rewrite declartion to add any additional indexed fields
-# desired.
+# based on the transfer method (UF/HEC/Kafka) desired. Then, provide a unique vendor string
+# for UF transport, and a unique sourcetype argument and optional index, topic, and message 
+# template arguments (as appropriate) for HEC/Kafka transport, paying careful attention to the 
+# note below.
+#
+# IMPORTANT:  If modifications are made in this section, ensure that two or more distinct 
+# destinations do *not* reference the same destination block call with an idential set of 
+# arguments (including no arguments, and arguments passed via destinations declared in other 
+# conf.d include files), or you will see this at startup: "Error checking the uniqueness of 
+# the persist names, please override it with persist-name option. Shutting down."  
+# The easiest way to satisfy this is to always pass a unique sourcetype argument for any new 
+# or changed destination declaration.
 # ===============================================================================================
 
 # ===============================================================================================
-# This catchall file should be the *only* one where the rewrite rules use defaults (no arguments)!
-# The "everything" destination is used here; check indexed event data in Splunk for full message.
+# This catchall file should be the *only* one where the destinations use defaults for all arguments!
+# Full-metadata destinations used here; check indexed event data in Splunk for full message.
 # This can be helpful to determine the compliance of message to standard syslog formats, and as 
 # an aid for custom parser development if needed.
 # ===============================================================================================
 
-#   destination(d_splunk_logfile);  #--UF--
-    rewrite { r_set_splunk()}; #--HEC--
-    destination(d_hec_everything);  #--HEC--
-#   rewrite { r_set_splunk()}; #--KAFKA--
-#   destination(d_kafka_default);  #--KAFKA--
-#   };
+destination {
+#   d_splunk_logfile();  #--UF--
+    d_hec_with_full_metadata();  #--HEC--
+#   d_kafka_with_full_metadata();  #--KAFKA--
+    };
 
 # ===============================================================================================
 # Fallback flag set here; will catch all unfiltered traffic
diff --git a/package/etc/conf.d/filters/f_cisco-ios.conf b/package/etc/conf.d/f_cisco-ios.conf
old mode 100644
new mode 100755
similarity index 64%
rename from package/etc/conf.d/filters/f_cisco-ios.conf
rename to package/etc/conf.d/f_cisco-ios.conf
index 2f1eaeb..c224a7a
--- a/package/etc/conf.d/filters/f_cisco-ios.conf
+++ b/package/etc/conf.d/f_cisco-ios.conf
@@ -24,8 +24,7 @@ source(s_default-ports);
 # ===============================================================================================
 
 # This is "normal" RFC3164-formatted (BSD-syslog) messages. Always try this one first if unsure.
-# parser { syslog-parser(time-zone(`default-timezone`)); };
-  parser { cisco-parser(); };
+parser { syslog-parser(time-zone(`default-timezone`)); };
 
 # For RFC5424-formatted messages, use this instead
 # parser { syslog-parser(time-zone(`default-timezone`) flags(syslog-protocol)); };
@@ -35,25 +34,31 @@ source(s_default-ports);
 # Filter below may be omitted in the log path if a dedicated source is configured above
 # ===============================================================================================
 
-#filter { match("[%|#][A-Z0-9_]+-[A-Z012_]*-*[0-7]-[A-Z0-9_]+:" value("MESSAGE"))
-#      ;};
+filter { match("[%|#][A-Z0-9_]+-[A-Z012_]*-*[0-7]-[A-Z0-9_]+:" value("MESSAGE"))
+      ;};
+
 
 # ===============================================================================================
 # Section 4:  destination configuration
 # Select the desired destination to use in the log path from the three choices below,
-# based on the transfer method (UF/HEC/Kafka) desired. Then, using the rewrite rule below,
-# provide the sourcetype and optional index (if different from the default) for thie data
-# source. Then, uncomment the second rewrite declartion to add any additional indexed fields
-# desired.
+# based on the transfer method (UF/HEC/Kafka) desired. Then, provide a unique vendor string
+# for UF transport, and a unique sourcetype argument and optional index, topic, and message 
+# template  arguments (as appropriate) for HEC/Kafka transport, paying careful attention to the 
+# note below.
+#
+# IMPORTANT:  If modifications are made in this section, ensure that two or more distinct 
+# destinations do *not* reference the same destination block call with an idential set of 
+# arguments (including no arguments, and arguments passed via destinations declared in other 
+# conf.d include files), or you will see this at startup: "Error checking the uniqueness of 
+# the persist names, please override it with persist-name option. Shutting down."  
+# The easiest way to satisfy this is to always pass a unique sourcetype argument for any new 
+# or changed destination declaration.
 # ===============================================================================================
 
-#   rewrite { r_set_splunk(vendor("cisco-IOS"))}; #--UF--
-#   destination(d_splunk_logfile);  #--UF--
-    rewrite { r_set_splunk(sourcetype("cisco:ios")) }; #--HEC--
-#   rewrite { set("testvalue", value("fields.testfield")); }; #--HEC--
-    destination(d_hec_standard);  #--HEC--
-#   rewrite { r_set_splunk(sourcetype("cisco:ios") index("cisco_infrastructure")) }; #--KAFKA--
-#   destination(d_kafka_standard);  #--KAFKA--
-
+destination {
+#   d_splunk_logfile(vendor("cisco-ios")); #--UF--
+    d_hec_with_metadata(sourcetype("cisco:ios")); #--HEC--
+#   d_kafka_with_metadata(sourcetype("cisco:ios")); #--KAFKA--
+    };
 flags(final);
 };
diff --git a/package/etc/conf.d/filters/f_palo_alto.conf b/package/etc/conf.d/f_palo_alto.conf
old mode 100644
new mode 100755
similarity index 69%
rename from package/etc/conf.d/filters/f_palo_alto.conf
rename to package/etc/conf.d/f_palo_alto.conf
index 61c5b18..868b94c
--- a/package/etc/conf.d/filters/f_palo_alto.conf
+++ b/package/etc/conf.d/f_palo_alto.conf
@@ -44,23 +44,24 @@ filter {    match(",THREAT," value("MESSAGE"))
 # ===============================================================================================
 # Section 4:  destination configuration
 # Select the desired destination to use in the log path from the three choices below,
-# based on the transfer method (UF/HEC/Kafka) desired. Then, using the rewrite rule below,
-# provide the sourcetype and optional index (if different from the default) for thie data
-# source. Then, uncomment the second rewrite declartion to add any additional indexed fields
-# desired.
-# ===============================================================================================
-
-#   rewrite { r_set_splunk(vendor("paloalto"))}; #--UF--
-#   destination(d_splunk_logfile);  #--UF--
-    rewrite { r_set_splunk(sourcetype("pan:log")) }; #--HEC--
-#   rewrite { set("testvalue", value("fields.testfield")); }; #--HEC--
-    destination(d_hec_everything);  #--HEC--
-#   rewrite { r_set_splunk(sourcetype("pan:log")) }; #--KAFKA--
-#   destination(d_kafka_with_metadata);  #--KAFKA--
-
-# ===============================================================================================
-# Final flag set here; further processing stops on filter match
+# based on the transfer method (UF/HEC/Kafka) desired. Then, provide a unique vendor string
+# for UF transport, and a unique sourcetype argument and optional index, topic, and message 
+# template arguments (as appropriate) for HEC/Kafka transport, paying careful attention to the 
+# note below.
+#
+# IMPORTANT:  If modifications are made in this section, ensure that two or more distinct 
+# destinations do *not* reference the same destination block call with an idential set of 
+# arguments (including no arguments, and arguments passed via destinations declared in other 
+# conf.d include files), or you will see this at startup: "Error checking the uniqueness of 
+# the persist names, please override it with persist-name option. Shutting down."  
+# The easiest way to satisfy this is to always pass a unique sourcetype argument for any new 
+# or changed destination declaration.
 # ===============================================================================================
 
+destination {
+#   d_splunk_logfile(vendor("paloalto"));  #--UF--
+    d_hec_with_metadata(sourcetype("pan:log") use_template("t_everything"));  #--HEC--
+#   d_kafka_with_metadata(sourcetype("pan:log") use_template("t_everything")); #--KAFKA--
+    };
 flags(final);
 };
diff --git a/package/etc/conf.d/filters/f_websense.conf b/package/etc/conf.d/f_websense.conf
old mode 100644
new mode 100755
similarity index 69%
rename from package/etc/conf.d/filters/f_websense.conf
rename to package/etc/conf.d/f_websense.conf
index 855410a..16fb2af
--- a/package/etc/conf.d/filters/f_websense.conf
+++ b/package/etc/conf.d/f_websense.conf
@@ -45,19 +45,24 @@ filter { program(Websense); };
 # ===============================================================================================
 # Section 4:  destination configuration
 # Select the desired destination to use in the log path from the three choices below,
-# based on the transfer method (UF/HEC/Kafka) desired. Then, using the rewrite rule below,
-# provide the sourcetype and optional index (if different from the default) for thie data
-# source. Then, uncomment the second rewrite declartion to add any additional indexed fields
-# desired.
+# based on the transfer method (UF/HEC/Kafka) desired. Then, provide a unique vendor string
+# for UF transport, and a unique sourcetype argument and optional index, topic, and message 
+# template arguments (as appropriate) for HEC/Kafka transport, paying careful attention to the 
+# note below.
+#
+# IMPORTANT:  If modifications are made in this section, ensure that two or more distinct 
+# destinations do *not* reference the same destination block call with an idential set of 
+# arguments (including no arguments, and arguments passed via destinations declared in other 
+# conf.d include files), or you will see this at startup: "Error checking the uniqueness of 
+# the persist names, please override it with persist-name option. Shutting down."  
+# The easiest way to satisfy this is to always pass a unique sourcetype argument for any new 
+# or changed destination declaration.
 # ===============================================================================================
 
-#   rewrite { r_set_splunk(vendor("websense"))}; #--UF--
-#   destination(d_splunk_logfile);  #--UF--
-    rewrite { r_set_splunk(sourcetype("websense:cg:kv")) }; #--HEC--
-#   rewrite { set("testvalue", value("fields.testfield")); }; #--HEC--
-    destination(d_hec_everything);  #--HEC--
-#   rewrite { r_set_splunk(sourcetype("websense:cg:kv")) }; #--KAFKA--
-#   destination(d_kafka_with_metadata);  #--KAFKA--
-
+destination {
+#   d_splunk_logfile(vendor("websense"));  #--UF--
+    d_hec_with_metadata(sourcetype("websense:cg:kv"));  #--HEC--
+#   d_kafka_with_metadata(sourcetype("websense:cg:kv")); #--KAFKA--
+    };
 flags(final);
 };
diff --git a/package/etc/conf.d/filters/f_cyberark.conf b/package/etc/conf.d/filters/f_cyberark.conf
deleted file mode 100644
index 94d5c8f..0000000
--- a/package/etc/conf.d/filters/f_cyberark.conf
+++ /dev/null
@@ -1,60 +0,0 @@
-# ===============================================================================================
-# Cisco IOS (Route/Switch)
-# ===============================================================================================
-
-log {
-# ===============================================================================================
-# Section 1:  source configuration
-# Defaults: default source and ports as defined in s_sources.conf and syslog-ng.conf.
-#
-# IMPORTANT:  In order to ensure proper startup, select only one source in this section.
-# If a source other than the default is used, ensure that any UDP/TCP protocol/port pairs passed
-# are unique throughout the *entire* sylog-ng config.  If there are any port overlaps with those
-# in source declarations from other filter files, an "Address already in use" error will occur
-# at startup.
-# ===============================================================================================
-
-# source(s_default-ports);
-
-source { s_unique-ports(udp_port(6514) tcp_port(6514)); };
-
-# ===============================================================================================
-# Section 2:  parser configuration
-# Default syslog-parser() should work for most messages
-# ===============================================================================================
-
-# This is "normal" RFC3164-formatted (BSD-syslog) messages. Always try this one first if unsure.
-# parser { syslog-parser(time-zone(`default-timezone`)); };
-# parser { cisco-parser(); };
-
-# For RFC5424-formatted messages, use this instead
-# parser { syslog-parser(time-zone(`default-timezone`) flags(syslog-protocol)); };
-  parser { p_RFC5424-lite(); };
-
-# ===============================================================================================
-# Section 3:  filter configuration
-# Filter below may be omitted in the log path if a dedicated source is configured above
-# ===============================================================================================
-
-#filter { match("[%|#][A-Z0-9_]+-[A-Z012_]*-*[0-7]-[A-Z0-9_]+:" value("MESSAGE"))
-#      ;};
-
-# ===============================================================================================
-# Section 4:  destination configuration
-# Select the desired destination to use in the log path from the three choices below,
-# based on the transfer method (UF/HEC/Kafka) desired. Then, using the rewrite rule below,
-# provide the sourcetype and optional index (if different from the default) for thie data
-# source. Then, uncomment the second rewrite declartion to add any additional indexed fields
-# desired.
-# ===============================================================================================
-
-#   rewrite { r_set_splunk(vendor("cisco-IOS"))}; #--UF--
-#   destination(d_splunk_logfile);  #--UF--
-    rewrite { r_set_splunk(sourcetype("cyberark")) }; #--HEC--
-#   rewrite { set("testvalue", value("fields.testfield")); }; #--HEC--
-    destination(d_hec_hdr_msg);  #--HEC--
-#   rewrite { r_set_splunk(sourcetype("cyberark") index("cisco_infrastructure")) }; #--KAFKA--
-#   destination(d_kafka_standard);  #--KAFKA--
-
-flags(final);
-};
diff --git a/package/etc/conf.d/sources/s_defaults.conf b/package/etc/conf.d/s_defaults.conf
old mode 100644
new mode 100755
similarity index 96%
rename from package/etc/conf.d/sources/s_defaults.conf
rename to package/etc/conf.d/s_defaults.conf
index cd7186f..40425dd
--- a/package/etc/conf.d/sources/s_defaults.conf
+++ b/package/etc/conf.d/s_defaults.conf
@@ -25,6 +25,7 @@ source s_default-ports {
            use-dns(no)
            use-fqdn(no)
            chain-hostnames(off)
+           time-zone(`default-timezone`)
            flags(no-parse)
            );
 
@@ -44,6 +45,7 @@ source s_default-ports {
            use-dns(no)
            use-fqdn(no)
            chain-hostnames(off)
+           time-zone(`default-timezone`)
            flags(no-parse)
            );
       };
diff --git a/package/etc/conf.d/splunk.conf b/package/etc/conf.d/splunk.conf
old mode 100644
new mode 100755
index eb337ec..fdbb14e
--- a/package/etc/conf.d/splunk.conf
+++ b/package/etc/conf.d/splunk.conf
@@ -26,16 +26,16 @@
 # ===============================================================================================
 # Kafka transport
 # ===============================================================================================
-@define kafka-implementation "kafka-c"
-@define splunk-kafka-brokers "kafka-1:19092,kafka-2:29092,kafka-3:39092"
-@define splunk-kafka-topic "syslog"
+@define kafka-lib-dir "/opt/kafka_2.11-0.11.0.0/libs"
+@define splunk-kafka-brokers "127.0.0.1:9092"
+@define splunk-topic "syslog"
 
 # ===============================================================================================
 # HEC transport
 # ===============================================================================================
-@define splunk-hec-url '__SPLUNK_HEC_URL__'
-@define splunk-hec-token "__SPLUNK_HEC_TOKEN__"
-@define worker-threads 20
+@define splunk-hec-url "http://127.0.0.1:9088/services/collector/event"
+@define splunk-hec-token "18f31be3-17e6-4e7b-88b0-4bdfbdb7ec88"
+
 # ===============================================================================================
 # Splunk metadata (HEC/Kafka transport only)
 # ===============================================================================================
@@ -43,7 +43,7 @@
 @define splunk-index "main"
 
 # ===============================================================================================
-# Default message template
+# Default message template 
 # ===============================================================================================
 @define splunk-default-template "t_standard"
 
@@ -52,7 +52,6 @@
 # ===============================================================================================
 @define ip-version 4
 @define splunk-max-connections 1000
-@define splunk-log-fifo-size 100000
 @define splunk-fetch-limit 100
 # make sure splunk-window-size >= splunk-max-connections * splunk-fetch-limit
 @define splunk-window-size 100000
@@ -63,8 +62,8 @@
 # Global modules and includes.  All device-specific filters and destinations exist in conf.d
 # Order is important; templates must be loaded first
 # ===============================================================================================
-@include "conf.d/templates/*.conf"
-@include "conf.d/sources/*.conf"
-@include "conf.d/blocks/*.conf"
-@include "conf.d/destinations/*.conf"
-@include "conf.d/filters/*.conf"
+@include "scl.conf"
+@include "conf.d/t_*.conf"
+@include "conf.d/s_*.conf"
+@include "conf.d/b_*.conf"
+@include "conf.d/f_*.conf"
diff --git a/package/etc/conf.d/templates/t_templates.conf b/package/etc/conf.d/t_templates.conf
old mode 100644
new mode 100755
similarity index 57%
rename from package/etc/conf.d/templates/t_templates.conf
rename to package/etc/conf.d/t_templates.conf
index e2a595a..b75dbbf
--- a/package/etc/conf.d/templates/t_templates.conf
+++ b/package/etc/conf.d/t_templates.conf
@@ -8,7 +8,7 @@
 # ===============================================================================================
 
 template t_standard {
-        template("${ISODATE} ${HOST} ${MESSAGE}");
+        template("${ISODATE} ${HOST} ${MESSAGE}\n");
         };
 
 # ===============================================================================================
@@ -16,29 +16,13 @@ template t_standard {
 # ===============================================================================================
 
 template t_msg_only {
-        template("${MESSAGE}");
+        template("${MESSAGE}\n");
         };
 
 # ===============================================================================================
-# Everything; useful for bluecoat proxy and others
+# Everything; useful for bluecoat proxy, palo alto, and others
 # ===============================================================================================
 
 template t_everything {
-        template("${ISODATE} ${HOST} ${MSGHDR}${MESSAGE}");
+        template("${ISODATE} ${HOST} ${MSGHDR}${MESSAGE}\n");
         };
-
-# ===============================================================================================
-# Message Header with Message; for Palo Alto
-# ===============================================================================================
-
-template t_hdr_msg {
-        template("${MSGHDR}${MESSAGE}");
-        };
-
-# ===============================================================================================
-# JSON; for JSON pretty-printing
-# ===============================================================================================
- 
-template t_JSON {
-	template("$(format-json --scope all-nv-pairs)");
-	};
diff --git a/package/etc/syslog-ng.conf b/package/etc/syslog-ng.conf
index 2389d62..612d826 100755
--- a/package/etc/syslog-ng.conf
+++ b/package/etc/syslog-ng.conf
@@ -1,18 +1,14 @@
-#############################################################################
-# Default syslog-ng.conf file which collects all local logs into a
-# single file called /var/log/messages tailored to container usage.
+@version:3.22
+
+# syslog-ng configuration file.
 #
-# The changes from the stock, default syslog-ng.conf file is that we've
-# dropped the system() source that is not needed and that we enabled network
-# connections using default-network-drivers(). Customize as needed and
-# override using the -v option to docker, such as:
+# This should behave pretty much like the original syslog on RedHat. But
+# it could be configured a lot smarter.
 #
-#  docker run ...  -v "$PWD/syslog-ng.conf":/etc/syslog-ng/syslog-ng.conf
+# See syslog-ng(8) and syslog-ng.conf(5) for more information.
 #
 
-@version: 3.22
-@include "scl.conf"
-
+#
 # ===============================================================================================
 # Global Options
 # ===============================================================================================
@@ -27,22 +23,64 @@ options {
         use_fqdn (no);
         create_dirs (no);
         keep-hostname (yes);
-        stats-level(3);
-        stats-max-dynamics(500);
 };
 
-source s_local {
-	internal();
-};
+# ===============================================================================================
+# Remote data sources that will be sent to Splunk
+# ===============================================================================================
 
-destination d_console {
-        pipe("/dev/stdout");
-};
+@include "conf.d/splunk.conf"
 
-@include "conf.d/*.conf"
+# ===============================================================================================
+# Local System sources
+# ===============================================================================================
 
-log {
-  source(s_local);
-  destination(d_console);
-  flags(final);
+source s_sys {
+        internal();
 };
+
+# ===============================================================================================
+# Local System destinations
+# ===============================================================================================
+
+destination d_cons { file("/dev/console"); };
+destination d_mesg { file("/var/log/syslog-ng/messages"); };
+destination d_auth { file("/dev/shm/secure"); };
+destination d_mail { file("/dev/shm/maillog" flush_lines(10)); };
+destination d_spol { file("/dev/shm/spooler"); };
+destination d_boot { file("/dev/shm/boot.log"); };
+destination d_cron { file("/dev/shm/cron"); };
+destination d_kern { file("/dev/shm/kern"); };
+destination d_mlal { usertty("*"); };
+destination d_syslog { file("/var/log/syslog"); };
+
+# ===============================================================================================
+# Local System filters
+# ===============================================================================================
+
+filter f_kernel     { facility(kern); };
+filter f_default    { level(info..emerg) and
+                        not (facility(mail)
+                        or facility(authpriv)
+                        or facility(cron)); };
+filter f_auth       { facility(authpriv); };
+filter f_mail       { facility(mail); };
+filter f_emergency  { level(emerg); };
+filter f_news       { facility(uucp) or
+                        (facility(news)
+                        and level(crit..emerg)); };
+filter f_boot   { facility(local7); };
+filter f_cron   { facility(cron); };
+
+# ===============================================================================================
+# Local System Logging
+# ===============================================================================================
+
+log { source(s_sys); filter(f_kernel); destination(d_kern); };
+log { source(s_sys); filter(f_default); destination(d_mesg); };
+log { source(s_sys); filter(f_auth); destination(d_auth); };
+log { source(s_sys); filter(f_mail); destination(d_mail); };
+log { source(s_sys); filter(f_emergency); destination(d_mlal); };
+log { source(s_sys); filter(f_news); destination(d_spol); };
+log { source(s_sys); filter(f_boot); destination(d_boot); };
+log { source(s_sys); filter(f_cron); destination(d_cron); };
diff --git a/package/sbin/entrypoint.sh b/package/sbin/entrypoint.sh
index d323b2e..edd411e 100755
--- a/package/sbin/entrypoint.sh
+++ b/package/sbin/entrypoint.sh
@@ -3,6 +3,6 @@
 #Run syslog
 mkdir /opt/syslog-ng/var
 rm /opt/syslog-ng/var/syslog-ng.ctl
-/opt/syslog-ng/bin/switch_transport.sh hec
+/opt/syslog-ng/sbin/switch_transport.sh hec
 /opt/syslog-ng/sbin/syslog-ng --process-mode=background
 /opt/syslog-ng/sbin/splunkmetrics.sh